Fosi Audio offers three subwoofer amplifiers with distinct power and feature sets. The M01-BT includes Bluetooth input and the highest max output, the TP-02 adds adjustable low-frequency control, and the M03 uses a TPA3255D2 chip for clean RMS power. Each is a compact class D mono amp suitable for passive or powered subwoofers.
Searching for the best Fosi Audio subwoofer amplifier? Fosi Audio makes several compact mono amplifiers designed to drive passive subwoofers and full-range speakers. This article compares three models from their published specs, ordered by maximum power output so you can quickly match amp strength to your subwoofer.
All listed amps are class D, support both subwoofer and full-frequency modes (via a SUB/PBTL switch), and include RCA input. Check current prices and availability on the Fosi Audio website.
How we chose
- Maximum power output (watts) as stated in published specs
- Supported frequency filtering or low-pass controls
- Input flexibility (Bluetooth vs. only RCA)
- Chip used (TDA7498E vs. TPA3255D2) and published THD figures
- Physical size and connectivity options (banana plugs, bare wire)
At a glance
| Product | Best for | Published specs |
|---|---|---|
| Fosi Audio M01-BT Bluetooth Subwoofer Mono Amp | Best for Bluetooth convenience and highest max power | Max power output up to 300W (chip: TDA7498E); Input: Bluetooth + RCA; Output: banana plugs / bare wire (passive sub or speaker) |
| Fosi Audio TP-02 Subwoofer Amplifier | Best for adjustable low-frequency control | Power: 220W x 1 (chip: TDA7498E); THD ≤0.04% (1KHz, 1W), SNR ≥98dB; Frequency response 20Hz – 250kHz |
| Fosi Audio M03 Subwoofer Mono Amplifier | Best for clean RMS power with TPA3255D2 chip | Max power 200W, RMS: 150W (4 ohms) / 120W (8 ohms); Chip: Texas Instruments TPA3255D2; Built-in low-pass filter: 20–300Hz |
1. Fosi Audio M01-BT Bluetooth Subwoofer Mono Amp

Based on published specs, the Fosi Audio M01-BT delivers the highest maximum power output at up to 300 watts, using a ST Microelectronics TDA7498E chip. It adds Bluetooth 5.0 input alongside RCA, allowing you to stream wirelessly to a passive subwoofer or a full-range speaker when switched to PBTL mode. The amplifier is compact and can accept banana plugs or bare wire for speaker connections.
Note: the brand states this amp is not suitable for active speakers. The THD is not specified in the data, but the chip is known for efficient class D operation. If you need Bluetooth and high peak power in a single mono amp, this is the model to consider.
- Max power output up to 300W (chip: TDA7498E)
- Input: Bluetooth + RCA
- Output: banana plugs / bare wire (passive sub or speaker)
- Mode switch: Full-frequency (PBTL) or subwoofer (SUB)
- Suitable for passive subwoofers and powered subwoofers (not active speakers)
Skip it if: You do not need Bluetooth or prefer lower peak power for a small subwoofer.
2. Fosi Audio TP-02 Subwoofer Amplifier

The Fosi Audio TP-02 uses the same TDA7498E chip but is rated at 220W x 1, according to the product handle. It features a built-in low-pass filter and a separate knob to adjust low frequencies from 30Hz to 260Hz, giving you practical bass tuning. The published specs show THD ≤0.04% and SNR ≥98dB.
This amplifier is marketed toward gamers, movie buffs, and music lovers who want to fine-tune sub-bass impact. It can connect to both powered and passive subwoofers. Note: the brand does not include Bluetooth, so input is via RCA only. If you prefer a dedicated subwoofer amp with adjustable crossover, this model is a good fit.
- Power: 220W x 1 (chip: TDA7498E)
- THD ≤0.04% (1KHz, 1W), SNR ≥98dB
- Frequency response 20Hz – 250kHz
- Adjustable low-frequency knob: 30Hz – 260Hz
- Built-in low-pass filter; input sensitivity 775mV
Skip it if: You need Bluetooth input or prefer a higher peak power rating.
3. Fosi Audio M03 Subwoofer Mono Amplifier

The Fosi Audio M03 is built around the Texas Instruments TPA3255D2 chip and delivers 150W RMS into 4 ohms (120W into 8 ohms) with a maximum output of 200W. It includes a built-in low-pass filter for subwoofer frequencies from 20–300Hz. Like the other models, it can switch between SUB (subwoofer amp) and PBTL (full-frequency mono amp) modes.
Based on published specs, this amp offers the highest continuous RMS power of the three, making it suitable for driving larger passive subwoofers or bookshelf speakers. The brand states it uses a Hi-Fi class D design for clean sound quality. No Bluetooth is included. The THD figure is not provided for this model in the data.
- Max power 200W, RMS: 150W (4 ohms) / 120W (8 ohms)
- Chip: Texas Instruments TPA3255D2
- Built-in low-pass filter: 20–300Hz
- Mode switch: SUB (subwoofer) / PBTL (full-range)
- Compact size; RCA input, speaker output
Skip it if: You want Bluetooth input or prefer the adjustable low-frequency knob of the TP-02.
How to choose a Fosi Audio subwoofer amplifier
Start by checking the power rating of your passive subwoofer. Fosi Audio amplifiers list both peak and RMS power; matching RMS to your subwoofer’s RMS handling is more reliable for everyday use. The M03 offers the highest RMS (150W into 4 ohms). Next, consider input options: the M01-BT is the only model with Bluetooth. If you need to adjust low-pass crossover frequency, the TP-02 provides a dedicated knob (30–260Hz), while the M01 and M03 have a fixed low-pass filter (the M01 filter is not specified; the M03 is 20–300Hz). All models include a SUB/PBTL switch, letting you use the amp for a full-range mono speaker as well. Finally, note that none of these amps support active speakers – they are designed for passive subwoofers or passive speakers only.
What the brand does not state
Fosi Audio does not publish the exact dimensions or weight of these subwoofer amplifiers in the provided data. The warranty terms are also not stated. The brand does not specify whether the included power supply is a desktop brick or internal, nor does it list the Bluetooth version for the M01-BT beyond mentioning it supports Bluetooth input. For any missing details, it is best to check the product page directly.
Frequently asked questions
Which Fosi Audio subwoofer amplifier has the highest power output?
Based on published specs, the M01-BT lists a maximum power output up to 300 watts (peak), while the TP-02 is rated at 220W x 1 and the M03 at 200W peak (150W RMS into 4 ohms). The M01-BT has the highest stated max power.
Can I use a Fosi Audio subwoofer amplifier with an active (powered) subwoofer?
The brand states that the M01-BT, M04, M03, and TP-02 can connect to powered subwoofers as well as passive subwoofers. However, the M01-BT is specifically noted as not suitable for active speakers. For powered subwoofers, you would typically use the line-level input only.
Do any Fosi Audio subwoofer amplifiers include Bluetooth?
Yes, only the M01-BT model includes Bluetooth input alongside RCA. The TP-02, M03, and M04 do not have Bluetooth according to the published data.
What is the THD (total harmonic distortion) of these subwoofer amplifiers?
The TP-02 has a published THD ≤0.04% (1KHz, 1W). The M04 states THD ≤0.02% (1KHz, 1W). For the M01-BT and M03, THD figures are not provided in the data.





