Home / Guides / Article

How to Choose Klebeadapter Laka-Tools

How to Choose Klebeadapter Laka-Tools
Disclosure: We earn a commission if you buy through our links, at no extra cost to you. Facts below come from the brand’s own published pages, checked 2026-10-24. We have not tested the products ourselves.
Quick verdict

Choosing a Laka Tools Klebeadapter means matching the adhesive surface to the dent size and panel contour. The catalog includes round tabs in sizes such as Ø5mm to Ø18mm, cold-glue adapters up to Ø56mm, and pads with flat, angled, radial, or conical shapes. Use the brand’s published dimensions and delivery contents to decide.

Visit Laka Tools

If you are searching “how to choose klebeadapter laka-tools”, this guide gives you a factual starting point based on Laka Tools’ published specifications on laka-tools.de. It explains the categories, pad shapes, and product examples you need to compare before you order.

Klebeadapter, also called Klebetabs or glue tabs in the data, are adhesive pulling attachments used in paintless dent removal. Laka Tools offers them as individual round and square tabs, cold-glue adapter sets, pull bolts, and separate adhesive pads in packs of 3.

Who this guide is for

This guide is for you if you are comparing Laka Tools glue-on adapters for PDR work and want to know what to look for before adding them to your order. The brand lists 97 products in the Klebeadapter LAKA-TOOLS category, plus related categories such as Kaltklebetechnik and PDR Tool Set.

You will not find first-hand testing claims here; this guide is based only on the published specs and product descriptions in the DATA block.

Key criteria to consider

  • Dent size and shape: Laka Tools sells small round tabs such as Ø5mm, Ø7mm, and Ø9mm, as well as larger cold-glue adapters up to Ø56mm and an edge version of 65x21mm. Match the footprint to the damaged area.
  • Adhesive surface shape: Klebepads are listed in flat, angled 120°, radial, and conical versions. Choose the shape that matches the panel contour.
  • Thread and pull system: The Kaltklebeadapter Set uses an M6 thread, according to the product description. If your pull tool uses M6, that set is a direct match based on the listed specification.
  • Color and material properties: The brand states that tabs have different materials depending on color. For example, translucent red and green tabs are described as pulling the center very well for smaller dents.
  • Pads vs. complete bolts: Some products are just adhesive pads in packs of 3, while the Zugbolzen 6 x 180 includes 3 pads. Check the delivery contents before ordering.

Common mistakes

  • Buying one size only: The Laka Tools range includes round tabs and larger cold-glue adapters, so a single adapter may not cover different dent sizes.
  • Ignoring pad geometry: The listed pad shapes are flat, angled 120°, radial, and conical. The shape changes how the pad contacts the panel, so check the contour.
  • Skipping surface prep: The brand’s application note says best adhesion is reached when the adapter and sheet metal are cleaned, for example with isopropanol, before gluing.
  • Assuming a set includes glue: The Kaltklebeadapter Set contains 7 adapters; the product text does not state that glue or pads are included.
  • Not checking the included parts: Some items, such as Klebepad packs, contain exactly 3 pads, so you need to order refills separately.

Questions to ask the brand

  • Which glue or adhesive pads are compatible with the Klebeadapter that uses M6 thread?
  • Is there a published pull-force or load rating for the Zugbolzen 6 x 180 or the Kaltklebeadapter Set?
  • For the green and translucent red tabs, what is the exact material composition? The brand says different colors have different material properties but does not publish full composition in the data.
  • Which pad shape should be used with the 120° angled surface: the angled pads listed separately or a specific adapter?
  • Does the 14-day withdrawal period apply to all adapter and pad orders? The brand policy states consumers can cancel within 14 days without giving a reason, but you should confirm if you are ordering as a business.

Examples from the brand in the DATA

These examples from the Laka Tools data show different ways to choose a glue-on adapter system:

  • kaltklebeadapter-laka-tools-set – A set with 7 cold-glue adapters in different sizes: XS D13 clear, S D16 black, M D23 yellow, L D30 orange, XL D40 red, XXL D56 blue, and a 65x21mm edge adapter in green. The thread is M6.
  • zugbolzen-6-x-180 – A pull bolt for repairing large-area damage. It has a 22mm wide angled adhesive surface of 120° and includes 3 adhesive pads in the delivery.
  • klebeadapter-transluzent-rot-o12mm – A 12mm translucent red glue tab. The brand says these tabs are designed to pull the center very well for smaller dents.
  • klebeadapter-gruen-oe12mm-death-center – A 12mm green ‘death center’ tab. The brand describes green tabs as pulling the center very well for smaller hail dents.

Checklist before you order

  • Identify the dent size and choose an adapter diameter range: Laka Tools offers from Ø5mm tabs up to Ø56mm cold-glue adapters.
  • Confirm the adhesive surface shape: flat, angled 120°, radial, or conical pads are listed in the Klebepad range.
  • Check the thread: the Kaltklebeadapter Set is M6; individual tabs may have different specifications, so verify on the product page.
  • Check the delivery contents: for example, Zugbolzen 6 x 180 includes 3 pads, while Klebepad packs are packs of 3 pads.
  • Clean the surfaces with a solvent such as isopropanol before use, according to the brand’s application note.
  • Review the 14-day consumer withdrawal policy and confirm your order qualifies.

Frequently asked questions

What is a Klebeadapter Laka-Tools?

Klebeadapter, also called Klebetabs or glue tabs, are adhesive pulling attachments in the Laka Tools range. The brand publishes round versions such as Ø5mm, Ø12mm, and Ø18mm, square/edge versions like 10x10mm and 12x12mm, and larger cold-glue adapters in sizes up to Ø56mm plus a 65x21mm edge format. The product texts do not list a universal pull-force rating.

How do I choose the right size?

Match the footprint to the dent. The data shows smaller tabs like the translucent red Ø5mm and Ø7mm, plus larger adapters such as the Kaltklebeadapter Set with XL D40, XXL D56, and a 65x21mm edge adapter. Green and translucent red tabs are described as pulling the center very well for smaller dents, so they are relevant for small hail damage.

What is the difference between the colored Klebeadapter?

The brand states that each color corresponds to different materials and therefore different properties. For example, the translucent red tabs are described as pulling the center very well, while the orange tabs are made from a plastic that mixes the plastics of red and blue. The exact composition is not stated by the brand.

Do the adapters come with pads or glue?

Only some products list adhesives or pads in the delivery contents. The Zugbolzen 6 x 180 includes 3 adhesive pads, and Klebepad packs are sold as 3 pieces, while the Kaltklebeadapter Set includes 7 adapters and does not state that glue or pads are included. Check each product page for the delivery contents.

What is the return policy?

According to the brand’s published Widerrufsrecht, consumers have a 14-day right of withdrawal from the day you or a named third party receives the goods, and you can cancel without giving a reason. The policy text in the data applies to consumers; shipping and warranty terms are not stated by the brand.

Sources and data checks: product information, policies and program details were taken from laka-tools.de and the GoAffPro program page on 2026-10-24. Brands change products, policies and offers; always confirm on the brand site before you buy.
We earn a commission if you buy through our links, at no extra cost to you. Links to the brand are marked as sponsored.

More about Laka Tools