Both are educational events by Makeblock, but tailored to different needs. The Czech workshop is a 5-hour in-person session in Prague using P2 and CyberPi, focusing on engraving and block programming. The Smart Fabrication online training is a 1-hour Zoom session using xTool F1, M1, P2, covering laser cutters and engravers for classroom projects. Choose based on location preference and depth of coverage.
If you searched for ‘Smart Fabrication in STEAM: Easy and Engaging Projects for Educators‘, you likely want to compare Makeblock’s two educator-focused events. One is an in-person workshop in the Czech Republic; the other is an online training session. Both aim to help teachers integrate modern fabrication and coding tools into STEAM lessons, but they differ significantly in format, duration, and equipment covered.
Below we compare the Smart Manufacturing in STEAM Education – Czech Republic workshop with the Smart Fabrication in STEAM: Easy and Engaging Projects for Educators online training, using only Makeblock’s published information. Note that neither event is a physical product you purchase; they are professional development opportunities.
![Czech Workshop vs Smart Fabrication Online Training 2 [Workshop] Smart Manufacturing in STEAM Education - Czech Republic](https://maxinshopee.com/wp-content/uploads/2026/10/10_1.png)

Side-by-side comparison
| [Workshop] Smart Manufacturing in STEAM Education – Czech Republic | Smart Fabrication in STEAM: Easy and Engaging Projects for Educators | |
|---|---|---|
| Type | Workshop (in-person) | Training (online) |
| Format | In-person at Magenta Experience Center, Prague | Online via Zoom |
| Duration | 5 hours | 1 hour |
| Date(s) | 11 and 22 October, 9 am | September 9, 1 pm EDT |
| Language | Not stated by the brand | English |
| Products Used | P2, CyberPi | xTool F1, M1, P2 |
| Instructor | Not stated by the brand | Ed Vawter, Co-Owner of Robot Academy LLC and Tech Solutions Now |
| Return Policy (event-specific) | Not applicable; event registration terms not stated by the brand | Not applicable; event registration terms not stated by the brand |
| Warranty (event-specific) | Not stated by the brand | Not stated by the brand |
Choose [Workshop] Smart Manufacturing in STEAM Education – Czech Republic if
- In-person attendees in the Czech Republic (Prague) who prefer practical, face-to-face learning
- Educators wanting a longer, deeper dive (5 hours) into engraving and block programming with P2 and CyberPi
- Teachers looking to network and experience a dedicated space at the Magenta Experience Center
Choose Smart Fabrication in STEAM: Easy and Engaging Projects for Educators if
- Educators worldwide who can join online (Zoom) without travel
- Those seeking a concise 1-hour introduction to laser cutters and engravers (xTool F1, M1, P2)
- Teachers who prefer a scheduled session with a named trainer (Ed Vawter) and clear English language instruction
[Workshop] Smart Manufacturing in STEAM Education – Czech Republic: pros and cons
- Pro: Longer duration (5 hours) allows more in-depth exploration of smart manufacturing concepts
- Pro: In-person format may foster direct interaction and immediate equipment access
- Pro: Partnership with Zonepi Research and Magenta Experience Center adds local credibility
- Con: Location limited to Prague, Czech Republic, excluding remote attendees
- Con: Language and instructor details not stated by the brand
Smart Fabrication in STEAM: Easy and Engaging Projects for Educators: pros and cons
- Pro: Online format eliminates travel and allows global participation
- Pro: Clear date, time, and language (English) are stated, plus a named trainer
- Pro: Covers multiple xTool devices (F1, M1, P2) for laser fabrication, which may appeal to a broader audience
- Con: Short 1-hour duration may limit practical practice depth
- Con: No information on follow-up resources or certification beyond the session
Overview of Each Event
Smart Manufacturing in STEAM Education – Czech Republic: This is a 5-hour in-person workshop held at the Magenta Experience Center in Prague, in cooperation with Zonepi Research. The brand states participants will ‘master both engraving and block programming with the help of fun projects’ and learn how to use these technologies in the classroom. Products used are the P2 and CyberPi.
Smart Fabrication in STEAM: Easy and Engaging Projects for Educators: This is a 1-hour online training via Zoom, led by Ed Vawter. The brand says after the session educators will have ideas for using laser cutters and engravers (xTool F1, M1, P2) to create resources like puzzles, templates, and educational tools. Language is English, and registration ends before the event.
Where They Differ
The most obvious differences are format and duration. The Czech workshop is in-person and 5x longer than the online training. The tools also differ: the workshop focuses on the P2 and CyberPi (coding and robotics), while the training focuses on xTool laser devices (fabrication). The training has a named trainer (Ed Vawter) and specifies English language; the workshop does not state language or instructor. The training is a single session on September 9; the workshop offers two dates in October.
Which Fits Which Need (by criteria)
- Choose the Czech workshop if: you are based in or can travel to Prague, prefer a longer immersive experience, and want to focus on coding/robotics with P2 and CyberPi.
- Choose the Smart Fabrication training if: you need a flexible online option, are interested in laser cutting/engraving with xTool devices, and prefer a short, structured session with a known instructor.
- If location is irrelevant and you want both topics: note that neither event covers both sets of tools (P2/CyberPi and xTool lasers) — they are separate.
What Neither Event States
Neither event listing includes a price or fee (check the Makeblock site for current pricing). There is no mention of certificates, continuing education credits, or session recording availability. The brand’s general returns and shipping policies apply to physical products only; event cancellations or refund policies for registration are not stated. Warranty terms are also not provided for these events.
See [Workshop] Smart Manufacturing in STEAM Education – Czech Republic See Smart Fabrication in STEAM: Easy and Engaging Projects for Educators
Frequently asked questions
Are these events free or paid?
The brand does not state any price for either event. You should check the Makeblock website or contact them directly to confirm if there is a registration fee.
Can I attend the Czech workshop if I am not in Prague?
The workshop is listed as in-person at the Magenta Experience Center in Prague. The brand does not mention any online streaming option, so you would need to be physically present.
What equipment do I need for the online Smart Fabrication training?
The training is held via Zoom, so you need a device that supports Zoom and an internet connection. The brand does not state whether you need your own laser cutter; the session likely uses the xTool F1, M1, and P2 as demonstration tools.
Will I receive a recording or materials after the sessions?
The brand’s product descriptions do not mention post-event recordings, handouts, or follow-up materials. Contact Makeblock directly for this information.
What is the difference between the Smart Manufacturing workshop and the Smart Fabrication training in terms of topics?
The Czech workshop covers engraving and block programming using P2 and CyberPi, focusing on smart manufacturing concepts. The Smart Fabrication training covers laser cutters and engravers (xTool F1, M1, P2) to create classroom resources. The tools and fabrication methods are different.





