Choosing the right spare parts for your TRAKRACER rig depends on understanding your frame type, slot size, and the specific component you need. The brand offers a range of brackets, screws, nuts, and profiles designed for 8mm T-slot extrusion profiles. Always verify compatibility with your rig model before ordering.
If you’re wondering how to choose spare parts for your TRAKRACER sim racing rig, the key is to match the part to your specific frame model and slot size. TRAKRACER offers a dedicated Spare Parts category with components like brackets, screws, profiles, and end caps designed for their extrusion-based systems.
This guide uses only the brand’s published information to help you identify the right part for your setup, whether you’re replacing a worn fastener or upgrading your wheel plate.



Who this guide is for
This guide is for owners of TRAKRACER extrusion-based sim racing rigs (models TR80, TR120, TR160, and others) who need to replace or upgrade components. It is also useful for anyone building a custom cockpit using 8mm T-slot aluminium profiles, as many spare parts are designed to fit standard 40x40mm or 40x80mm extrusion.
Key criteria
- Frame compatibility: Check if the part is tagged for your rig model (e.g., Compatibility_TR160, Frame_TR80).
- Slot size: All listed spare parts use an 8mm T-slot. Ensure your profiles match.
- Profile dimensions: Brackets and end caps are sized for specific profile widths and heights (e.g., 40x40mm, 80x40mm, 120x40mm).
- Fastener type and length: Screws come in various lengths (16mm, 20mm, 25mm, 30mm) and head styles (hex, button head, countersunk, flat hex).
- Material and finish: Many parts are hardened steel or aluminium with black anodised or nickel-plated finishes for corrosion resistance.
Common mistakes
- Ordering a bracket that is too short or too tall for your profile. For example, a 120mm bracket may not fit a 160mm profile.
- Choosing the wrong screw length. Using a 30mm screw where a 20mm is needed can cause interference or poor clamping.
- Assuming all M8 screws are the same. Head type (hex vs. button vs. countersunk) affects fit in recessed or flush applications.
- Forgetting to order washers or lock washers to prevent loosening during use.
Questions to ask the brand
- What is the exact slot size required for this part? (All listed parts use 8mm, but confirm if your rig uses a different standard.)
- Is this part compatible with my specific rig model (e.g., TR160, TR80 Lite)?
- Are the screws made of hardened steel? (Many are, but check the product description.)
- What is the finish or coating? (Black anodised, nickel-plated, etc.)
- Does the bracket come with mounting hardware? (Some sets include screws and T-nuts.)
Examples from the brands in the DATA
replacement-80×40-profiles – A set of two 600mm aluminium extrusion profiles with 8mm T-slot, ideal for extending or reinforcing your rig frame.
spare-corner-bracket-160-x-40mm – Heavy-duty die-cast aluminium brackets for adding stability at corner joints on 160mm-high profiles.
universal-wheel-plate-deck-with-full-slide-and-angle-adjustment – A fully adjustable wheel plate that fits multiple Trak Racer frames and allows forward/backward, height, and angle adjustments.
m8-x-30mm-hardened-hex-screws-pack-of-5 – Hardened steel hex screws for securing thicker brackets and structural components.
Checklist before you order
- Identify your rig model (e.g., TR80, TR160, TR120).
- Measure the profile dimensions (width x height) and slot size (8mm).
- Determine the type of part needed: bracket, screw, nut, washer, end cap, or profile.
- Check the product tags for compatibility with your frame.
- Verify the quantity: some parts are sold in sets of 2, 5, 6, 20, etc.
- Review the product description for included hardware.
40 x 80mm 600mm Aluminium Extrusion Profile, 8mm Slot – Set of 2
Aluminum Corner Brackets (Set of 2) – 160mm Height x 40mm Width for Extrusion Rigs
Universal Wheel Base Plate Deck with Full Slide and Angle Adjustment
M8 x 30mm Hardened Hex Screws – Pack of 5
Frequently asked questions
What spare parts does TRAKRACER offer?
Based on the brand’s published data, TRAKRACER offers brackets, aluminium profiles, screws, nuts, washers, end caps, wheel plates, and pivot joints, all designed for 8mm T-slot extrusion systems.
How do I know which screw length to use?
The brand lists screws in lengths from 16mm to 30mm. Shorter screws (16-20mm) are often used for pedal plates and thin brackets, while longer screws (25-30mm) are for thicker structural components. Check the product description for typical usage.
Are the brackets compatible with non-TRAKRACER rigs?
Some brackets, like the black aluminium corner bracket set, are stated to be compatible with other branded extrusion rigs that use 8mm slots. Always verify dimensions before ordering.
What is the difference between hex screws and button head screws?
Hex screws have a standard hex socket, while button head screws have a lower-profile domed head. The brand uses button head screws on TR160 pedal kits and hex screws for general fastening.
Can I use these spare parts for flight simulators?
TRAKRACER sells spare parts under both sim racing and flight sim categories. The aluminium profiles, brackets, and fasteners are designed for extrusion-based cockpits, which could be used in flight sim setups as well.





