Makeblock offers five after-sale accessories that expand your robot kits. The Me Ultrasonic Sensor and Me Line Follower Sensor add sensing capabilities, while the encoder motor provides precise motion control. The Bluetooth module enables wireless programming. Each item is designed to integrate with Makeblock’s construction platform.
If you searched for ‘best after-sale accessories Makeblock’, you’ll find five official add-ons that enhance your robotics builds. Based on Makeblock’s published product pages, we compare these components to help you choose the right upgrade for your project.
We selected all five available after-sale accessories and ranked them by their role in building or upgrading a Makeblock robot—from essential sensors to motor and connectivity modules. Each item’s specs are taken directly from the brand’s website.
How we chose
- All five products are official Makeblock after-sale accessories.
- We ordered them by functional complexity: starting with simple sensors, then motor, then wireless module.
- Each item’s specs were verified from the brand’s product description.
- We considered compatibility with Makeblock beams and electronic modules.
- No price or customer reviews were used (not stated).
At a glance
| Product | Best for | Published specs |
|---|---|---|
| Me Line Follower Sensor | Best for line-tracking projects based on listed specs | Comes with an Arduino library for easy programming; Easy wiring with 6-pin RJ25 interface; 2.54mm breakout pins for jumper wires |
| Me Ultrasonic Sensor V3.0 Sensor | Best for distance sensing based on listed specs | Comes with Arduino library for easy programming; Over-current protection; 6-pin RJ25 interface; yellow tag |
| #SH 0.02.1700 25mm photoelectric encoder motor 9V/185RPM (with back plate and protective cover) assembly | Best for precise motion control based on listed specs | 25mm photoelectric encoder motor; 9V operating voltage; 185RPM; Comes with back plate and protective cover |
| #SH Injection synchronizing wheel 90T-with steps | Best for timing belt systems based on listed specs | Injection-molded synchronizing wheel; 90 teeth (90T) with steps; Designed for timing belt systems |
| #SH Bluetooth Module (Single Mode), Bluetooth 4.0 for mBot | Best for wireless control based on listed specs | Bluetooth 4.0 (Single Mode); Low power consumption; extends battery life; Max range 20-30 meters (free field) |
1. Me Line Follower Sensor

The Me Line Follower Sensor is designed to detect and follow lines on a surface, making it ideal for line-tracking robot builds. Based on the brand’s specs, it comes with an Arduino library for easy programming and uses a 6-pin RJ25 interface for simple wiring. The sensor also includes 2.54mm breakout pins for connecting with jumper wires, and it is labeled with a blue tag for identification.
Compatibility is emphasized: the sensor works with the Me–Base Shield and features 16mm interval M4 mounting holes, allowing direct attachment to Makeblock beams. This sensor is a straightforward addition for any robot that needs to follow a path, and its open-source construction platform roots mean it integrates seamlessly with other Makeblock parts.
- Comes with an Arduino library for easy programming
- Easy wiring with 6-pin RJ25 interface
- 2.54mm breakout pins for jumper wires
- Blue tag; compatible with Me–Base Shield
- 16mm interval M4 mounting holes
Skip it if: Skip this if you don’t need line-following functionality or prefer a different sensing method.
2. Me Ultrasonic Sensor V3.0 Sensor

The Me Ultrasonic Sensor V3.0 is a distance-measuring module that uses sound waves to detect objects. According to the brand’s description, it comes with an Arduino library for easy programming and includes over-current protection. Wiring is handled via a 6-pin RJ25 interface, and the sensor is labeled with a yellow tag for quick identification.
It is compatible with both the Me Base Shield and the Me Baseboard, and features 54mm breakout pins for connecting with jumper wires. On-board indicator LEDs provide debugging and feedback. The 16mm interval M4 mounting holes ensure it attaches securely to Makeblock beams, making it a versatile addition for obstacle avoidance and proximity-based projects.
- Comes with Arduino library for easy programming
- Over-current protection
- 6-pin RJ25 interface; yellow tag
- Compatible with Me Base Shield and Me Baseboard
- 16mm interval M4 mounting holes; on-board indicator LEDs
Skip it if: Skip this if your project does not require ultrasonic distance sensing or if you prefer infrared alternatives.
3. #SH 0.02.1700 25mm photoelectric encoder motor 9V/185RPM (with back plate and protective cover) assembly

The encoder motor (model 0.02.1700) is a 25mm photoelectric encoder motor that runs at 9V and 185RPM. Based on brand specs, it includes a back plate and protective cover, making it a ready-to-install component for robots that need accurate speed and position control. The encoder allows feedback for more controlled movements.
This motor is listed under After-Sale Accessories, suggesting it is a replacement or upgrade part for existing Makeblock robots. Its 25mm diameter and 185RPM speed make it suitable for medium-speed applications. The back plate and cover simplify mounting, and the encoder output can be used with Makeblock’s electronic modules for closed-loop control.
- 25mm photoelectric encoder motor
- 9V operating voltage; 185RPM
- Comes with back plate and protective cover
- Encoder provides feedback for speed/position control
Skip it if: Skip this if you do not need motor replacement or precise motion feedback in your robot.
4. #SH Injection synchronizing wheel 90T-with steps

The injection synchronizing wheel (90T with steps) is a mechanical component designed for use with timing belts. Based on the brand’s category, it is an after-sale accessory that helps synchronize movement between axes in robot builds. The ’90T’ indicates 90 teeth, and ‘with steps’ suggests it has a stepped profile for specific belt compatibility.
As part of Makeblock’s open-source construction platform, this wheel likely integrates with standard Makeblock beams and shafts. It is a straightforward mechanical part that adds precise rotational synchronization to any DIY robot or motion system. No electronic specs are provided, so it is a pure mechanical accessory.
- Injection-molded synchronizing wheel
- 90 teeth (90T) with steps
- Designed for timing belt systems
- Listed under After-Sale Accessories category
Skip it if: Skip this if your project does not involve timing belts or if you need electronic components instead.
5. #SH Bluetooth Module (Single Mode), Bluetooth 4.0 for mBot

The Bluetooth Module (Single Mode, Bluetooth 4.0) is designed for the mBot robot kit. According to brand specs, it makes it easier for users to learn graphical programming languages via Makeblock and mBlock software. Bluetooth 4.0 provides low power consumption, helping to extend battery life in portable projects.
This module offers a stable, high-speed wireless transceiver system with a maximum range of 20-30 meters in free field conditions. It is a single-mode Bluetooth module, meaning it supports BLE but not classic Bluetooth. well suited for adding wireless control or programming capability to your mBot or other Makeblock creations without requiring extra cables.
- Bluetooth 4.0 (Single Mode)
- Low power consumption; extends battery life
- Max range 20-30 meters (free field)
- Supports graphical programming with Makeblock and mBlock
Skip it if: Skip this if you prefer wired connections or need Bluetooth Classic compatibility.
How to Choose Makeblock After-Sale Accessories
When selecting an after-sale accessory for your Makeblock robot, start by considering the interface compatibility. All listed sensors (Me Line Follower, Me Ultrasonic) use a 6-pin RJ25 interface, which works with Makeblock’s Me Base Shield and baseboards. Mechanical parts like the encoder motor and synchronizing wheel rely on standard M4 mounting holes (16mm interval) for beam attachment. The Bluetooth module is purpose-built for the mBot but can likely be used with other Makeblock controllers that support Bluetooth 4.0.
- Function: Decide if you need sensing (line following or ultrasonic), motion (encoder motor), mechanical transmission (synchronizing wheel), or wireless connectivity (Bluetooth).
- Programming: Sensors and the Bluetooth module come with Arduino library support, making them easier to code in Arduino IDE or mBlock.
- Power: The encoder motor requires a 9V supply; sensors and the Bluetooth module draw power from the main board.
What the Brand Does Not State
Makeblock does not provide warranty terms for these after-sale accessories on their product pages. The exact dimensions of the injection synchronizing wheel (other than 90 teeth) and the full weight of each accessory are also not stated. Shipping times and costs may vary, as the brand notes that international orders are not accepted through their US store. No customer ratings, review counts, or compatibility lists beyond what is mentioned (e.g., Me Base Shield, mBot) are published. If you need detailed mechanical drawings or a list of all compatible robots, you may need to contact customer service at service@makeblock.com.
Frequently asked questions
What interfaces do these Makeblock after-sale accessories use?
The Me Line Follower Sensor and Me Ultrasonic Sensor both use a 6-pin RJ25 interface for wiring. The encoder motor uses standard power and encoder wires. The Bluetooth module connects via a dedicated port on the mBot. The synchronizing wheel is a purely mechanical part with no electronic interface.
Are the sensors compatible with Arduino?
Yes, based on the brand’s description, both the Me Line Follower Sensor and Me Ultrasonic Sensor come with an Arduino library, making them programmable in the Arduino IDE.
Does the Bluetooth module work with the mBot only?
The brand specifically lists this module ‘for mBot’ and mentions support for Makeblock and mBlock software. Compatibility with other Makeblock robots is not stated, but it uses standard Bluetooth 4.0, which may work with other controllers if properly configured.
What voltage does the encoder motor require?
The encoder motor is listed as 9V, with a speed of 185RPM. It includes a back plate and protective cover. The brand does not specify maximum current draw or stall torque.
Do these accessories come with mounting screws or cables?
The brand’s product descriptions do not mention included mounting hardware or cables. The encoder motor is stated to come with a back plate and protective cover. For the sensors and Bluetooth module, you may need to use standard M4 screws and RJ25 cables separately.




