The Autel CSC0802-10 is a dedicated corner reflector for radar calibration on specific Toyota, Honda, and Subaru vehicles, while the CSC0800 is a stand assembly that supports multiple reflectors and laser setups. Neither replaces the other; they serve different roles in a calibration system. Both come with a one-year limited warranty and are covered by Autel’s 30-day return policy.
If you’re comparing the Autel CSC0802-10 Corner Reflector (US Version) vs the Autel CSC0800 Corner Reflector Stand (US Version), you’re likely building out an ADAS calibration setup. The CSC0802-10 is the reflector itself, while the CSC0800 is the stand that holds it. Based on the brand’s published specs, here’s how they differ and what each brings to your shop.
Both accessories are designed for radar calibration procedures, but they serve distinct functions. The CSC0802-10 is an OE-sized reflector for specific vehicle makes, and the CSC0800 provides the physical support structure. You may need both for a complete calibration system.
Side-by-side comparison
| Autel CSC0802-10 Corner Reflector | US Version | Autel CSC0800 Corner Reflector Stand | US Version | |
|---|---|---|
| Product Type | Corner reflector (radar calibration accessory) | Stand assembly (with base and attachment handle) |
| Part Number | CSC0802-10 (North American part number 802-10) | CSC0800 (part number 800) |
| Key Published Specs | OE-sized corner reflector; designed for supported Toyota, Honda, and Subaru vehicles including Blind Spot Monitoring (BSM) systems. | Stand assembly includes stand, stand base, and attachment handle; compatible with applicable Autel corner reflectors and laser emitter. |
| Included Items | Corner reflector unit only (US Version) | Stand, stand base, and attachment handle (US Version) |
| Warranty | One-year limited warranty (stated in product description) | One-year limited warranty (stated in product description) |
| Return Policy | 30-day return policy (from brand site); free return shipping for defective/damaged items; customer pays for non-quality returns. | Same as A (shared brand policy) |
| Shipping Policy | Free standard shipping within continental US (4-6 business days after processing); expedited/air options available. | Same as A (shared brand policy) |
| Vehicle Compatibility | Toyota, Honda, Subaru (BSM systems) – exact models not stated by the brand. | Listed as applicable for 'applicable Autel corner reflectors' – specific vehicles not stated. |
Choose Autel CSC0802-10 Corner Reflector | US Version if
- Technicians needing an OE-sized reflector for Toyota, Honda, and Subaru BSM calibration
- Users who already have a stand (e.g., CSC0800) and need only the reflector component
- ADAS jobs that require the specific part number 802-10 as per calibration procedure
Choose Autel CSC0800 Corner Reflector Stand | US Version if
- Building a complete calibration setup when you need a stable mount for a corner reflector and laser
- Shops that already own reflectors but lack the stand assembly to position them correctly
- Technicians who want a dedicated base and handle for repeated calibration tasks
Autel CSC0802-10 Corner Reflector | US Version: pros and cons
- Pro: OE-sized design for specific Toyota, Honda, and Subaru BSM systems
- Pro: Covers one-year limited warranty
- Pro: Designed as a direct accessory for supported calibration procedures
- Con: Does not include a stand or mounting equipment
- Con: Vehicle and procedure compatibility details not fully stated by the brand
Autel CSC0800 Corner Reflector Stand | US Version: pros and cons
- Pro: Complete stand assembly with base and handle for easy positioning
- Pro: Compatible with multiple Autel corner reflectors and laser emitter
- Pro: Covered by one-year limited warranty
- Con: Not a standalone calibration tool – requires separate reflector and laser
- Con: Specific dimensions or load capacity not stated by the brand
Overview of Each Product
Autel CSC0802-10 Corner Reflector (US Version): This is an OE-sized corner reflector designed for radar calibration procedures on certain Toyota, Honda, and Subaru vehicles, including Blind Spot Monitoring (BSM) systems. The brand states it is a calibration accessory for procedures that specify this reflector. It comes as a single unit (US Version, part number 802-10) and is covered by a one-year limited warranty.
Autel CSC0800 Corner Reflector Stand (US Version): This stand assembly includes three components: a stand, a stand base, and an attachment handle. It is intended for use with applicable Autel corner reflectors and the laser emitter during radar calibration. The brand notes it is a dedicated supporting assembly for building the setup your calibration procedure requires. Also covered by a one-year limited warranty.
Where They Differ
The primary difference is function: the CSC0802-10 is a reflector component, while the CSC0800 is a stand that holds it. The reflector is vehicle-specific (Toyota, Honda, Subaru BSM), whereas the stand is a general-purpose accessory for multiple reflector and laser setups. The reflector includes only one item; the stand includes three. Both share the same warranty and return/shipping policies. Neither product includes the other – if you need both, you’ll need to purchase separately.
Which Fits Which Need (by Criteria)
Choose the CSC0802-10 if: Your calibration procedure specifically requires an OE-sized corner reflector for Toyota, Honda, or Subaru BSM systems, and you already own a compatible stand or mounting solution.
Choose the CSC0800 if: You need a stable stand to support a corner reflector and laser during calibration, and you already have the correct reflector for your vehicle application.
Consider both if: You’re setting up a complete ADAS calibration system from scratch for supported Toyota, Honda, or Subaru vehicles.
What Neither States
The brand does not state the exact dimensions, weight, or material of either product. Compatibility with specific vehicle models beyond Toyota, Honda, and Subaru (for the reflector) is not listed. The CSC0800’s compatibility with specific Autel reflectors (like the CSC0802-10) is implied but not explicitly confirmed in the data. Pricing, shipping times outside the continental US, and warranty claim procedures are also not stated by the brand.
See Autel CSC0802-10 Corner Reflector | US Version See Autel CSC0800 Corner Reflector Stand | US Version
Frequently asked questions
Can the CSC0802-10 corner reflector be used with the CSC0800 stand?
The brand states the CSC0800 stand is compatible with ‘applicable Autel corner reflectors’ and laser setups. The CSC0802-10 is a corner reflector. Based on the published descriptions, they are likely designed to work together, but explicit compatibility is not stated by the brand.
What vehicles are supported by the CSC0802-10?
The brand lists supported vehicles as Toyota, Honda, and Subaru, specifically for Blind Spot Monitoring (BSM) systems. Exact model years or trim levels are not stated by the brand.
Is the CSC0800 stand sold with a reflector?
No. The brand states the CSC0800 includes only the stand, stand base, and attachment handle. It does not include a corner reflector or laser emitter. You need to purchase those separately.
What warranty is offered on these products?
Both the CSC0802-10 and CSC0800 are covered by a one-year limited warranty, as stated in their product descriptions. The brand does not provide full warranty terms in the data.
What is the return policy if I order the wrong part?
Autel US offers a 30-day return policy. Return shipping is free for defective or incorrectly shipped items. For other returns (e.g., wrong part ordered by mistake), the customer pays return shipping, which may be deducted from the refund.
