Home / Reviews / Article

Me Line Follower Sensor Review: Makeblock Module Specs

Me Line Follower Sensor Review: Makeblock Module Specs
Disclosure: We earn a commission if you buy through our links, at no extra cost to you. Facts below come from the brand’s own published pages, checked 2026-10-25. We have not tested the products ourselves.
Quick verdict

Based on Makeblock’s published information, the Me Line Follower Sensor is an after-sale accessory module designed for easy line-following projects. It features an Arduino library, a 6-pin RJ25 interface, and breakout pins for jumper wiring. Key specifications like detection range and operating voltage are not stated by the brand.

Visit Makeblock

If you are searching for a Me Line Follower Sensor review, this article provides the key facts taken directly from Makeblock’s published product data. The sensor is listed as an After-Sale Accessory in the Modules & Accessories category.

Makeblock describes itself as an open-source construction platform for STEAM education, offering mechanical parts, electronic modules, and software. The Me Line Follower Sensor is one of their components, intended for use with the Makeblock ecosystem.

Me Line Follower Sensor
Image: Makeblock

Published specs

Spec As published
Category After-Sale Accessories, Modules & Accessories
Interface 6-pin RJ25
Breakout Pins 2.54mm pitch for jumper wires
Compatibility Compatible with Me–Base Shield
Mounting Hole 16mm interval, M4
Programming Support Arduino library available
Tag Color Blue

Who it suits

  • Users building line-following robots within the Makeblock platform.
  • Makers who prefer easy programming with an included Arduino library.
  • Those who want a sensor module with a standard RJ25 interface for quick wiring.

Who should skip

  • People not using Makeblock components or the Me–Base Shield.
  • Users who need detailed performance specifications such as detection range or voltage, which are not stated by the brand.
  • Those looking for a fully self-contained sensor without the need to write Arduino code.

Pros

  • Comes with an Arduino library for straightforward programming.
  • 6-pin RJ25 interface simplifies wiring.
  • Includes 2.54mm breakout pins for flexible jumper connections.
  • Compatible with the Me–Base Shield via the blue-tag identification system.

Cons

  • Detection range and accuracy are not stated by the brand.
  • Operating voltage and current draw are not listed in the published data.
  • Physical dimensions and weight are not provided by Makeblock.

What It Is

The Me Line Follower Sensor is a module classified as an After-Sale Accessory by Makeblock. According to the brand, it is part of the open-source Makeblock platform that provides mechanical parts, electronic modules, and software for turning ideas into reality.

Key Features as Published

  • Comes with an Arduino library for easy programming.
  • Easy wiring with a 6-pin RJ25 interface.
  • 2.54mm breakout pins for connecting with jumper wires.
  • Labeled with a blue tag for compatibility identification.

Size, Power & Compatibility Details

The brand does not state the physical dimensions, weight, operating voltage, or current requirements of the sensor. For mounting, the module uses a 16mm interval M4 hole. It is compatible with the Me–Base Shield as indicated by the blue tag. No further power or size specifications are available from the brand page.

Before You Buy

Makeblock offers free standard shipping on domestic orders over an amount stated on the brand page, with handling time of 1–3 business days and delivery of 7–10 business days. International orders are not accepted through the store. Returns are accepted within 30 days from dispatch for unused items in original packaging. Check the current price on the brand site.

See it on Makeblock

Frequently asked questions

What is the Me Line Follower Sensor?

It is an after-sale accessory module from Makeblock designed for line-following projects. It includes an Arduino library and uses a 6-pin RJ25 interface for wiring.

Is the Me Line Follower Sensor compatible with Arduino?

Yes, the brand states that the module comes with an Arduino library for easy programming.

What mounting holes does the sensor have?

The module has M4 mounting holes spaced at 16mm intervals, as stated by Makeblock.

Does the sensor work with the Makeblock Me–Base Shield?

Yes, the sensor is labeled with a blue tag and is described as compatible with the Me–Base Shield.

What is the operating voltage of the Me Line Follower Sensor?

The operating voltage is not stated by the brand in the published data.

Sources and data checks: product information, policies and program details were taken from makeblock.com and the GoAffPro program page on 2026-10-25. Brands change products, policies and offers; always confirm on the brand site before you buy.
We earn a commission if you buy through our links, at no extra cost to you. Links to the brand are marked as sponsored.

More about Makeblock