Autel offers four purpose-built ADAS calibration accessories for radar calibration procedures. The lineup includes a corner reflector stand, a battery-powered laser emitter, and two OE-sized corner reflectors covering Hyundai, Mazda, Toyota, Honda, and Subaru vehicles. Each accessory is sold as a US Version and comes with a one-year limited warranty.
Autel’s ADAS Calibration Accessories category includes exactly four items designed to support radar calibration setups. These components work together to help position and align corner reflectors during procedures such as Blind Spot Monitoring (BSM), Adaptive Cruise Control (ACC), and Front Collision Warning (FCW) calibration.
The four accessories are ordered here by their role in a typical calibration workflow: start with the stand, add the laser for positioning, then select the appropriate corner reflector based on the supported vehicle makes. All items are identified by Autel as US Version and carry a one-year limited warranty.
How we chose
- Role in the calibration setup: stand, laser emitter, then reflector.
- Vehicle compatibility as published by Autel (specific makes listed per reflector).
- Warranty coverage: each accessory includes a one-year limited warranty.
- Availability as US Version with North American part numbers.
At a glance
| Product | Best for | Published specs |
|---|---|---|
| Autel CSC0800 Corner Reflector Stand | US Version | Best foundation for your calibration setup based on listed specs | Includes stand, stand base, and attachment handle; Part number 800 (US Version); Designed for use with applicable Autel corner reflectors and laser emitter |
| Autel CSC0802-13 Corner Laser | US Version | Best for precise reflector positioning based on published specs | Battery-powered laser emitter; Part number 802-13 (US Version); Assists positioning of applicable corner reflector |
| Autel CSC0802-11 Corner Reflector | US Version | Best for Hyundai and Mazda radar calibration based on published vehicle support | OE-sized corner reflector for Hyundai and Mazda vehicles; Used for BSM, ACC, and FCW calibration procedures; Part number 802-11 (US Version) |
| Autel CSC0802-10 Corner Reflector | US Version | Best for Toyota, Honda, and Subaru radar calibration based on published vehicle support | OE-sized corner reflector for Toyota, Honda, and Subaru vehicles; Used for BSM calibration procedures; Part number 802-10 (US Version) |
1. Autel CSC0800 Corner Reflector Stand | US Version
The Autel CSC0800 Corner Reflector Stand is the base assembly for setting up corner reflector and laser equipment during radar calibration. It includes three components: the stand, a stand base, and an attachment handle. Autel states that this stand is designed for use with applicable Autel corner reflectors and the laser emitter, making it the first piece you need when building a calibration configuration.
This US Version accessory (part number 800) is covered by Autel’s one-year limited warranty. The stand provides a dedicated supporting structure, so you can attach the laser and reflector as required by your specific calibration procedure. Note that the corner reflector and laser are sold separately.
- Includes stand, stand base, and attachment handle
- Part number 800 (US Version)
- Designed for use with applicable Autel corner reflectors and laser emitter
- One-year limited warranty
Skip it if: You already own a compatible stand for Autel corner reflectors.
2. Autel CSC0802-13 Corner Laser | US Version
The Autel CSC0802-13 Corner Laser is a battery-powered laser emitter used to position an applicable corner reflector during radar calibration. This US Version accessory (part number 802-13) is designed to fit between the stand and an applicable corner reflector, assisting with alignment before the calibration procedure begins.
Autel states that the laser is battery-powered and covered by a one-year limited warranty. It is a dedicated component for use with the corner reflector stand and appropriate reflectors. If your calibration procedure requires laser-guided reflector placement, this accessory is the published solution from Autel.
- Battery-powered laser emitter
- Part number 802-13 (US Version)
- Assists positioning of applicable corner reflector
- One-year limited warranty
Skip it if: Your calibration procedure does not require a laser positioning accessory.
3. Autel CSC0802-11 Corner Reflector | US Version
The Autel CSC0802-11 Corner Reflector is an OE-sized reflector designed for radar calibration on supported Hyundai and Mazda vehicles. According to Autel’s published information, this accessory is used for Blind Spot Monitoring (BSM), Adaptive Cruise Control (ACC), and Front Collision Warning (FCW) applications. It is supplied as the US Version with part number 802-11.
Autel specifies that this corner reflector is a calibration accessory for procedures that require this particular reflector. It is covered by a one-year limited warranty. If you are performing radar calibration on Hyundai or Mazda models that call for this reflector, the CSC0802-11 is the recommended part from Autel.
- OE-sized corner reflector for Hyundai and Mazda vehicles
- Used for BSM, ACC, and FCW calibration procedures
- Part number 802-11 (US Version)
- One-year limited warranty
Skip it if: You need a corner reflector for Toyota, Honda, or Subaru vehicles instead.
4. Autel CSC0802-10 Corner Reflector | US Version
The Autel CSC0802-10 Corner Reflector is an OE-sized reflector intended for radar calibration on supported Toyota, Honda, and Subaru vehicles. Autel states that this accessory is used for Blind Spot Monitoring (BSM) systems. It is supplied as the US Version with part number 802-10.
This corner reflector is a calibration accessory for procedures that specify this reflector. Autel covers it with a one-year limited warranty. If your calibration procedure involves a Toyota, Honda, or Subaru vehicle that requires this reflector, the CSC0802-10 is the published Autel part to use.
- OE-sized corner reflector for Toyota, Honda, and Subaru vehicles
- Used for BSM calibration procedures
- Part number 802-10 (US Version)
- One-year limited warranty
Skip it if: You need a corner reflector for Hyundai or Mazda vehicles instead.
How to choose an Autel ADAS calibration accessory
Start by identifying the calibration procedure required for your vehicle. Autel publishes specific vehicle makes for each corner reflector: the CSC0802-10 covers Toyota, Honda, and Subaru, while the CSC0802-11 covers Hyundai and Mazda. The CSC0800 corner reflector stand and CSC0802-13 corner laser are general-purpose components that work with applicable Autel reflectors. All four accessories are sold as US Version and include a one-year limited warranty. Note that the stand and laser are sold separately from the reflectors, so you may need to purchase multiple items for a complete setup.
What the brand does not state
Autel does not publish the exact dimensions or weight of these accessories on the product pages used for this article. The specific list of compatible vehicle models and model years for each corner reflector is not provided in the available product descriptions; only the vehicle makes are stated. Prices are not listed in the published data. Compatibility with third-party ADAS calibration frames or equipment is not addressed. Autel’s warranty terms beyond the one-year limited warranty period are not detailed.
Frequently asked questions
What is included with the Autel CSC0800 Corner Reflector Stand?
The CSC0800 includes three components: the stand itself, a stand base, and an attachment handle. It is sold as the US Version with part number 800.
Which vehicles are compatible with the Autel CSC0802-10 Corner Reflector?
According to Autel, the CSC0802-10 is an OE-sized corner reflector for supported Toyota, Honda, and Subaru vehicles, used for Blind Spot Monitoring (BSM) calibration procedures.
Is the Autel CSC0802-13 Corner Laser battery-powered?
Yes. Autel states that the CSC0802-13 laser emitter uses battery power to operate. It is designed to assist with positioning an applicable corner reflector during radar calibration.
What warranty is offered on Autel ADAS calibration accessories?
Autel states that each of these four accessories is covered by a one-year limited warranty. Further details about warranty terms are not provided in the available product information.
